Where To Place Carbon Monoxide Detectors In Your Hartford Property
Residents must safeguard against a variety of risks like fire, flooding, and burglary. But what about something that can’t be discerned by human senses? Carbon monoxide poses an uncommon challenge as you might never realize it’s there. Even so, installing CO detectors can effectively shield your family and property. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Hartford property.
What Is Carbon Monoxide?
Referred to as the silent killer because of its absence of odor, color, and taste, carbon monoxide is a readily found gas caused by an incomplete combustion of fuels. Any appliance that consumes fuels like an oven or fireplace can create carbon monoxide. Even though you typically won’t have problems, complications can arise when equipment is not frequently inspected or adequately vented. These missteps could cause a build-up of this potentially deadly gas in your interior. Generators and heating appliances are commonly to blame for CO poisoning.
When exposed to lower levels of CO, you could experience headaches, dizziness, fatigue nausea, or vomiting. Prolonged exposure to higher levels can lead to cardiopulmonary arrest, and even death.
Tips On Where To Place Hartford Carbon Monoxide Detectors
If you don’t use a carbon monoxide detector in your interior, get one now. Preferably, you ought to use one on each floor of your home, including basements. Here are a few tips on where to place carbon monoxide detectors in Hartford:
- Place them on every level, specifically in areas where you use fuel-burning appliances, including furnaces, fireplaces, gas dryers, and water heaters.
- Always install one within 10 feet of bedroom areas. If you only have one carbon monoxide detector, this is where to put it.
- install them about 10 to 20 feet from sources of CO.
- Do not position them immediately next to or above fuel-utilizing appliances, as a non-hazardous amount of carbon monoxide could be released when they turn on and trigger a false alarm.
- Secure them to walls at least five feet above the floor so they will sample air where occupants are breathing it.
- Avoid putting them beside windows or doors and in dead-air areas.
- Put one in areas above attached garages.
Test your CO detectors routinely and maintain them in accordance with manufacturer guidelines. You will generally need to replace units within five or six years. You should also make sure any fuel-burning appliances are in in optimal working condition and sufficiently vented.